|
|
Superior Ring and Pinion Gears
Wrangler TJ 1997-2006
If your Wrangler TJ's tires are larger than stock, you have probably noticed a loss of performance. Regain it, and more with these performance gears from Superior Axle and Gear. The Wrangler TJ came standard with a Model 30 front axle and a Model 35 rear axle. On newer Wrangler TJs, 3.07:1 gear ratios were "standard" with other options available. When changing from lower gear ratios, it is often necessary to change the gear case. If you are unsure of your current gear ratio, check with your dealership or give our knowledgeable sales staff a call. Have your VIN number handy.
The "Rubicon" model came with Model 44 axles front end rear with factory lockers and 4.11:1 gear ratios. The "Rubicon" gear sets listed below are designed to work with the factory locker.
On a four wheel drive vehicle, front and rear gear ratio's MUST be matched!!!
Many replacement parts are required when installing new gears. Superior installation kits are a sure way to have all the highest quality parts you need. Professional installation is required for all gear changes.
Model 30 Front Axle (non-Rubicon)
* When Changing from a 3.54:1 or lower gear ratio, case MUST be changed.
Model 35 Rear Axle (non-Rubicon)
* When Changing from a 3.31:1 or lower gear ratio, case MUST be changed.
Model 44 Rear Axle (non-Rubicon)
* When Changing from a 3.73:1 or lower gear ratio, case MUST be changed unless using 4.88:1 "thick-cut" gears.
| Part Number |
Part Application |
Price |
Part# D44409
|
GEAR, RING/PINION 4.09 RATIO DANA 44
1972-2006 JEEP (CLICK MORE INFO)
More Information about this Gear, Ring/Pinion 4.09 Ratio Dana 44
|
Price: $172.99
|
Part# D44455
|
GEAR, RING/PINION 3.54 RATIO DANA 44
1972-2006 JEEP (CLICK MORE INFO)
More Information about this Gear, Ring/Pinion 3.54 Ratio Dana 44
|
Price: $172.99
|
Part# D44489
|
GEAR, RING/PINION 4.88 RATIO DANA 44
1972-1996 JEEP (CLICK MORE INFO)
More Information about this Gear, Ring/Pinion 3.54 Ratio Dana 44
|
Price: $199.99
|
Part# D44488X
|
GEAR, RING/PINION 4.88 RATIO THICK-CUT GEARS DANA 44
2003-2006 JEEP WRANGLER TJ AND UNLIMITED
More Information about this Gear, Ring/Pinion 4.88 Ratio Dana 44
|
Price: $182.99
|
Part# 706025X
|
CASE STANDARD DIFF W/GASKET & BOLTS DANA 44 W/FLANGED AXLES
1970-2006 JEEP CJ, CJ7 & WRANGLER TJ, UNLIMITED ALSO XJ & ZJ
More Information about this Case Standard Diff W//Gasket & Bolts Dana 44 W/Flanged Axles
|
Price: $69.99
|
Rubicon Model 44 Front and Rear Axles
* Work with factory case.
Jeep is a registered trademark of Chrysler
LLC.
Copyright® 2008 Morris Motor Company. |
|
|
|
|
|
|
|
|
| | |
|
Now Accepting 
|