Jeep 8 inch Suspension Lift Kits by Skyjacker

Skyjacker 8" Rock Ready I Lift Kits

Skyjacker is known around the world for their award-winning suspensions. Check out this 8 inch Jeep Wrangler Lift Kit – it’s the ultimate in suspension technology! With a new integrated sub-frame assembly, Skyjacker has now re-engineered the suspension geometry of the Wrangler TJ.

With Hydro For mild to moderate off-road use, look into the Hydro Series Shocks from Skyjacker. These high-quality shocks feature hydraulic action, twin-tube construction, and a chromed piston rod with micro-pores. Perfect for street riding, Hydro shocks provide a noticeable advantage over original equipment and really go the distance! Grab control of the road ahead – get Skyjacker Hydro Shocks today!! Series Shocks and Nitro The Skyjacker Nitro Shock Series – for both moderate and extreme off-road conditions. These hardcore shocks feature 150 PSI pressurized nitrogen gas, twin-tube construction, red polyurethane bushings, and much more! With true velocity sensitive valving, the Nitro gives a stable and controlled ride. Both durable and long-lasting, these shocks deliver consistently and have a limited lifetime warranty. You can’t go wrong with a Skyjacker Nitro Shock – they really go the distance!! you can now clear 38’s right out of the box!! More height, more flex, and more fun…with Skyjacker, they’re all yours!! *Factory shocks must be replaced with longer units.

Safety Note: when lifting a Jeep 4" or higher it is necessary to replace your factory length brake lines with new extended brake lines.
Click for more Information .

8 Inch Key Features

Skyjacker 8" Bent Arm Rock Ready II Lift Kit

The new TJ Long Arm High Clearance Series also includes 1/4" wall control arms that are arched (Bent) for ground clearance and increased approach angles.

These Rock Ready Systems are specifically designed with the 'mild-to-extreme' rock crawler in mind. These Systems have taken the abuse of some of the harshest terrain in the land and have come back asking for more.

These Long Arm Kits feather the new "NG" (next generation) rod ends. The lower 1-1/4" forged design heims feature 95,000 psi of strength. The also have an internal rebuildable design with new pivot plus inserts for maximum articulation.

Hydro For mild to moderate off-road use, look into the Hydro Series Shocks from Skyjacker. These high-quality shocks feature hydraulic action, twin-tube construction, and a chromed piston rod with micro-pores. Perfect for street riding, Hydro shocks provide a noticeable advantage over original equipment and really go the distance! Grab control of the road ahead – get Skyjacker Hydro Shocks today!! Series Shocks and Nitro The Skyjacker Nitro Shock Series – for both moderate and extreme off-road conditions. These hardcore shocks feature 150 PSI pressurized nitrogen gas, twin-tube construction, red polyurethane bushings, and much more! With true velocity sensitive valving, the Nitro gives a stable and controlled ride. Both durable and long-lasting, these shocks deliver consistently and have a limited lifetime warranty. You can’t go wrong with a Skyjacker Nitro Shock – they really go the distance!! Reach for the sky – get Skyjacker today!!

Safety Note: when lifting a Jeep 4" or higher it is necessary to replace your factory length brake lines with new extended brake lines.
Click for more Information .

8 Inch Key Features

Steering Stabilizer HD OEM Replacement Kit Skyjacker
Sold Separately!
Includes Skyjacker red boot.. For 1997-2006 Jeep Wrangler TJ & Unlimited.

8" Lift Kit Upgrade

SJ-7009

Single Steering Stabilizer Kit Skyjacker
Sold Separately!
This kit replaces the factory stabilizer and includes new mounting brackets. For 1997-2006 Jeep Wrangler TJ & Unlimited.

8" Lift Kit Upgrade

SJ-7119

Dual Steering Stabilizer Duel Kit Skyjacker
Sold Separately!
Without Aftermarket Track Bar, red boot.. For 1997-2006 Jeep Wrangler TJ & Unlimited.

8" Lift Kit Upgrade

SJ-7219

Dropped Pitman Arm , Manual Steering, Skyjacker
Sold Separately!
A dropped pitman is designed to compensate for a vehicle's suspension lift to help maintain the factory feel at the steering wheel by eliminating "bump steer" and any potential interference with the steering components and the vehicle's chassis. For 1997-2006 Jeep Wrangler TJ & Unlimited.

8" Lift Kit Upgrade

SJ-JA850

Slip Yoke Eliminator, NP231 Transfer Case, Skyjacker
Sold Separately!
Skyjacker’s Slip Yoke Eliminator Kit increases drive shaft length by 4.5”, stopping vibration and stress.. For 1997-2006 Jeep Wrangler TJ & Unlimited.

8" Lift Kit Upgrade

SJ-RR231

C.V. Yoke Rear, Skyjacker
Sold Separately!Rubicon Models Only

Get rid of that old or damaged rear driveshaft on your lifted vehicle and replace it with a driveshaft from Skyjacker. Made from high-quality steel, these replacement driveshafts are designed with all of the quality that Skjacker is famous for.

8" Lift Kit Upgrade

SJ-CVR680

Drive Train; Drive Shaft; Rear, Lift Height 6 in. - 8 in.; , Skyjacker
Sold Separately!

After installing a Slip Yoke Eliminator Kit it is necessary to include a longer driveshaft into the equation.

8" Lift Kit Upgrade

SJ-TJRS

Brake Line,4-8 inch, Front,Stainless Steel,Pair Skyjacker
Sold Separately!
Skyjacker's stainless steel brake lines have been tried and tested in some of the most severe conditions 4-wheeling has to offer, in virtually every corner of the world. They are proven in their quality of engineering, workmanship, and finish, and are D.O.T. certified. For 1997-2006 Jeep Wrangler TJ & Unlimited.

8" Lift Kit Upgrade

SJ-FBL44

Brake Line, 4-8 Inch, Rear, Stainless, Single, Skyjacker
Sold Separately!
Skyjacker's stainless steel brake lines have been tried and tested in some of the most severe conditions 4-wheeling has to offer, in virtually every corner of the world. They are proven in their quality of engineering, workmanship, and finish, and are D.O.T. certified. For 1997-2006 Jeep Wrangler TJ & Unlimited.

8" Lift Kit Upgrade

SJ-RBL98

Grab Handles by Skyjacker
Sold Separately!
ROCK READY ROLL BAR GRAB HANDLES 2 &3 inches(PAIR), BY SKYJACKER FITS ALL JEEPS. Skyjacker Grab Handles will give you the grip to hang on tight through sharp turns and tough terrain! These high quality grab handle pieces are tested throughly by Skyjacker for look and functionality. Skyjacker Grab Handles are made to fit on 2" and 3" Roll Bars and come in black or red.

Roll Bar Grab Handles 2" Black (pair), Skyjacker

SJ-RRGH20-K

Roll Bar Grab Handles 2" Red (pair), Skyjacker

SJ-RRGH20-R

Roll Bar Grab Handles 3" Red (pair), Skyjacker

SJ-RRGH30-R

Roll Bar Grab Handles 3" Black (pair), Skyjacker

SJ-RRGH30-K