Dana Model 18 Transfer Case Parts for CJ Willys
Years: 1946, 1947, 1948, 1949, 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970 and 1971
Need replacement parts for a rebuild on your Dana Model 18 Jeep Transfer Case? We have a wide selection of quality, factory replacement parts for your CJ Willy. From O-rings, Seals, Bearings, Shafts, Planetary Gears, and more all at Low, Discount Prices, always at Morris 4x4 Center.
| Item | Description | Years | Comments | Part Number | Price | Buy Now |
| 1 | Overhaul Repair Kit | 1946-1971 | With 1-1/8" Intermediate Gear Shaft |  D18A-BSG |
$129.99 | |
| Overhaul Repair Kit | 1946-1971 | With 1-1/4" Intermediate Gear Shaft | D18B-BSG |
$147.99 | ||
| 2 | Complete Assembled Transfer Case | 1946-1971 | Includes Dual Shifter Kit, All 4 Cylinders With 3 Speed Transmission | 937477 |
$689.99
Oversize Freight : $60.00 |
|
| 3 | Gaskets, Oil Seal & Felts Kit | 1946-1971 | 923300 |
$15.99 | ||
| 3a | Gaskets Kit | 1946-1971 | A7443 |
$9.99 | ||
| 4 | Front Output Shaft | 1946-1971 | 807892 |
$34.99 | ||
| 5 | Bearing, Front Output Shaft | 1946-1971 | 4338892 |
$19.99 | ||
| 6 | Snap Ring, Front Output Shaft Bearing | 1946-1971 | A976 |
$1.99 | ||
| 7 | Felt Front Or Rear Yoke | 1946-1971 | 2 Needed | 932295 |
$0.99 | |
| 8 | Oil Seal, Front Or Rear Yoke | 1946-1971 | 2 Needed | 8123077 |
$3.99 | |
| 9 | Rear Output Shaft | 1946-1971 | 807767 |
$88.99 | ||
| 10 | Bearing Cone, Front Or Rear Output Shaft | 1946-1971 | Need 2 | 51575 |
$29.99 | |
| 11 | Bearing Cup, Front Or Rear Output Shaft | 1946-1971 | Need 2 | 51577 |
$12.99 | |
| 12 | Bushing, Front Output Shaft | 1946-1971 | A987 |
$3.99 | ||
| 13 | Front Output Shaft Sliding Gear | 1946-1971 | 39 Teeth Count (mark 18-8-17) | A15045 |
$114.99 | |
| Front Output Shaft Sliding Gear | 1946-1971 | 33 Teeth Count (18-8-22) | 809290 |
$88.99 | ||
| 14 | Front Output Shaft Gear | 1946-1971 | 29 Teeth Count (mark 18-8-24) | 809291 |
$59.99 | |
| 15 | Thrust Washer, Front Outer Shaft Gear | 1946-1971 | A990 |
$3.99 | ||
| 16 | Snap Ring, Front Output Shaft Gear | 1946-1971 | A991 |
$0.99 | ||
| 17 | Output Shaft Hub | 1946-1971 | A992 |
$18.99 | ||
| 18 | Interemediate Gear | 1946-1971 | 39x18 Teeth Coutn (mark 18-5-9) | 809293 |
$93.99 | |
| 19 | Shaft, Intermediate Gear | 1946-1971 | 3/4" | A998 |
$7.99 | |
| Shaft, Intermediate Gear | 1946-1971 | 1-1/8" | 642188 |
$19.99 | ||
| Shaft, Intermediate Gear | 1946-1971 | 1-1/4" | 942115 |
$13.99 | ||
| 19A | Shaft, Needles & Washer Kit | 1946-1971 | 942115K |
$30.99 | ||
| 19B | Intermediate Shaft Kit | 1946-1971 | 1-1/8" | 642188K |
$40.99 | |
| 20 | Roller Bearing, Intermediate Gear Shaft | 1946-1971 | With 3/4" Shaft (cage Bearing, 2 Needed) | A924 |
$6.99 | |
| Roller Bearing, Intermediate Gear Shaft | 1946-1971 | With 1-1/8" Shaft (cage Bearing, 2 Needed) | 642190 |
$15.99 | ||
| Roller Bearing, Intermediate Gear Shaft | 1946-1971 | With 1-1/4" Shaft (needle Bearing, 48 Needed) | 809294 |
$0.99 | ||
| 21 | Spacer, Intermediate Gear Shaft | 1946-1971 | 809295 |
$1.99 | ||
| 22 | Thrust, Washer, Intermediate Shaft | 1946-1971 | For 3/4" Shaft (2 Needed) | A1000 |
$3.99 | |
| Thrust, Washer, Intermediate Shaft | 1946-1971 | For 1-1/8" Shaft (2 Needed) | 642191 |
$8.99 | ||
| Thrust, Washer, Intermediate Shaft | 1946-1971 | For 1-1/4" Shaft (2 Needed) | 8121813 |
$2.99 | ||
| 23 | Mainshaft Gear | 1946-1971 | 29 Teeth, 6 Spline | 809297 |
$62.99 | |
| Mainshaft Gear | 1949-1971 | 29 Teeth, 10 Spline | 947382 |
$79.99 | ||
| 24 | Front Yoke | 1946-1971 | A1106 |
$41.99 | ||
| 25 | Yoke, Rear | 1946-1971 | For (mb, 2a, 3a, 3b, M38, M38a1) | 116714 |
$39.99 | |
| 26 | Nut For Front Or Rear Yoke | 1946-1971 | Front, 2 Needed | 801367 |
$2.99 | |
| 27 | Shift Lever Pivot Pin | 1946-1971 | A972 |
$2.99 | ||
| 27a | Spring Shift Lever | 1946-1971 | 801332 |
$1.99 | ||
| 28 | Shift Rod Oil Seal | 1946-1971 | 2 Needed | A974 |
$2.99 | |
| 29 | Shift Fork | 1946-1971 | A959 |
$16.99 | ||
| 31 | Dual Lever Shifter Boot | 1946-1971 | 801058 |
$6.99 | ||
| 32 | Shift Knob | 1946-1971 | Each | 914946 |
$4.99 | |
| 33 | Transfer Case Mount | 1946-1971 | Rear | A6156 |
$11.99 | |
| 34 | Mount Support For Kit Bolt & Insulators | 1946-1971 | Rear, With Bolt & Insulators | 926671K |
$7.99 | |
| Washer For Transfer Case Snubber | 1946-1971 | 4006365 |
$2.99 |
Years Covered: 1946, 1947, 1948, 1949, 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970 and 1971
Back to Top
