Skyjacker™ Suspension Accessories

Softride Leaf Springs

These replacement Skyjacker Leaf Springs are designed to be used to replace damaged or worn leaf springs on Jeep Wrangler YJ's that have already been modifed with a Skyjacker Lift Kit, they are not designed to be an alternative to a full suspension lift kit and/or a build-your-own lift kit. Ride quality and suspension life are king when you replace factory front leaf springs with Skyjacker’s all-American steel Softride Front Leaf Springs. They don’t come any tougher that Skyjacker Softrides, which boast a smooth ride and maximum weight capacity.

Rock Ready Leaf Springs

The latest in off-road leaf spring technology is Skyjacker's Rock Ready Monolinear System. It has a Single Leaf Spring that is engineered to give the maximum articulation, maximum tire clearance and maximum durability. In addition, you will want to utilize the performance of the Double Military Wrap Leaf Spring to gain torque control, main leaf protection and exceptional ride quality. Double Military Wrap Leaf Springs have larger spring eyes and larger bushings at both ends for strength and longevity.

Steering Stabilizer HD OEM Replacement Kit Skyjacker

Steering stabilizers improve steering wheel and vehicle control by reducing or stopping unwanted shake/shimmy that might occur while driving, especially with larger tire diameters. Includes Skyjacker red boot.

Steering Stabilizer HD OEM Replacement Kit Skyjacker

SJ-7009

Single Steering Stabilizer Kit with Red Boots

A steering stabilizer is a dampening shock for your steering system. It dampens out the harshness of the highway, the "shimmy" from running the additional weight of larger tires & wheels and places control back into the driver’s hands. Stabilizers also reduce the fatigue of the driver by reducing the amount of physical strength it takes to guide those larger tires on and off the road. Changing the weak stock unit for a better performing replacement or adding dual steering stabilizers is an inexpensive and worthy investment.

Single Steering Stabilizer Kit with Red Boots

SJ-7109

Dual Steering Stabilizer Kit, Skyjacker

These Skyjacker dual steering stabilizers go one step further than the single kit when reducing the "shimmy" effect after lifting your jeep with a new suspension and larger tires. Reduce the harshness of both on and off road driving and get rid of the extra strain on your steering components. These Dual Steering Stabilizers are designed for large tire set-ups and include Skyjacker's limited lifetime warranty

Dual Steering Stabilizer Kit, Skyjacker

SJ-7200

Brake Line, 3.5 - 6 Inch, Rear, Stainless Steel, Pair, Skyjacker

Lifting your rig creates a wide gap between your master cylinder and your brakes. Stock brake lines fall short, but Skyjacker's Stainless Steel Brake Lines go the extra mile. Skyjacker knows how to craft hard-wearing off-road parts.That's why they use only the most durable materials in your Stainless Steel Brake Lines, Braided stainless steel for strength. Skyjacker's Stainless Steel Brake Lines ensure that your most important pedal works when you need it most.

Brake Line, 3.5 - 6 Inch, Rear, Stainless Steel, Pair, Skyjacker

SJ-RBL47

Slip Yoke Eliminator Fixed Kit, NP231 Transfer Case

Skyjacker’s Slip Yoke Eliminator Kit solves the problem with a fixed yoke, 32-spline output shaft that can stand-up to off-road and on-road rigors. It also increases drive shaft length by 4.5”, stopping vibration and stress. Note: Replacement C.V. Driveshaft is REQUIRED

Slip Yoke Eliminator Fixed Kit, NP231 Transfer Case

SJ-FIX231

Slip Yoke Eliminator, Rock Ready, NP231 Transfer Case Skyjacker

Reduce drive line vibration on lifted vehicles with Skyjacker's heavy-duty Slip Yoke Eliminator (SYE) Kit for Jeep's NP231J transfer case. Transfer case tailshaft length is reduced by 6.5" on 1997-2006 Wranglers and 4.25" on 1988-1995 models resulting in improved drive line angles. Skyjacker’s Kit includes a redesigned transfer case main shaft which is not only shorter, but has an 18% larger spline diameter (32 splines) and allows a 54% increase in torque capacity. This SYE Kit allows you to run a longer, CV Style drive shaft.

Slip Yoke Eliminator, Rock Ready, NP231 Transfer Case Skyjacker

SJ-RR231

Transfer Case Lowering Kit, 2-4 Inch Lift, Skyjacker

Transfer case lowering kits allow enthusiasts to gain height without sacrificing the driveshaft. They help eliminate drivetrain angle problems and annoying driveline vibration.

Transfer Case Lowering Kit, 2-4 Inch Lift, Skyjacker

SJ-TCL25

5th Link Traction Bar Assembly, Skyjacker

Increase the traction and keep the articulation in your 1987-1995 Jeep Wrangler YJ . Skyjacker’s 5th Link Traction Bar is the fix for unwanted suspension movement that causes axle-wrap. Axle-wrap relates to unwanted rear pinion changes that cause drivelines to bind-up, driveshafts to buckle, suspension damage and yokes to break. A heavy-duty crossmember attaches to the factory frame rails as an anchor point in front of the axle. The crossmember has a re-enforced locator eye fitted with greasable polyurethane bushing as a front attachment point for the 'C' shackle. This unique 'C' Shackle is a key element in Skyjacker’s 5th Link design.

5th Link Traction Bar Assembly, Skyjacker

SJ-YJ5LK

Dropped Pitman Arm
Sold Separately!

A dropped pitman is designed to compensate for a vehicle's suspension lift to help maintain the factory feel at the steering wheel by eliminating "bump steer" and any potential interference with the steering components and the vehicle's chassis.

Extended Sway Bar Endlinks
Sold Separately!

These double disconnect sway bar end links from Skyjacker are extended and allow the disconnect to be removed without unbolting anything else. Included, you’ll find polyurethane bushings and quick-release pins to ensure easy adjustment. For maximum off-road articulation, you can disconnect the sway bars and then simply re-install the pins when ready to ride home. For the quick disconnect you’re looking for, these Skyjacker Sway Bar Links do the trick!!

Sold Separately!
ROCK READY ROLL BAR GRAB HANDLES 2 &3 inches(PAIR), BY SKYJACKER FITS ALL JEEPS. Skyjacker Grab Handles will give you the grip to hang on tight through sharp turns and tough terrain! These high quality grab handle pieces are tested throughly by Skyjacker for look and functionality. Skyjacker Grab Handles are made to fit on 2" and 3" Roll Bars and come in black or red.