Skyjacker™ Suspension Accessories

Shifter Relocation Brackets
Sold Separately!

Skyjacker’s Shifter Relocation Brackets eliminate the need to mount your transfer case shifter directly to your jeeps body by relocating the mount to the transfer case for smoother shifting.

Body Lift Kit, Height 1 Inch Polyurethane, Skyjacker

A body lift may be what you need to get that extra clearance for oversized tires. They are available in 1”, 2” and 3” sizes. Skyjacker also has a 1” polyurethane body lift available for CJ, YJ and TJ models.

Body Lift Kit, Height 1 Inch Polyurethane, Skyjacker

SJ-SS941P

Suspension Link Arm Kit, 4-8 inch Lift, Skyjacker

97-06 Jeep Wrangler TJ, Rubicon 4wd Suspension Link Arm Kit, 4-8 inch Lift, Skyjacker SJ-JUL48SFX

Suspension Link Arm Kit, 4-8 inch Lift, Skyjacker

SJ-JUL48SFX

Pinion Cam Bolt Kit, Rear, Skyjacker

1993--2006 Jeep Wrangler TJ, Jeep Grand Cherokee ZJ Pinion Cam Bolt Kit, Rear, Degree 0-4, Skyjacker SJ-CAM500

Pinion Cam Bolt Kit, Rear, Skyjacker

SJ-CAM500

Your jeeps stock transfer case is not designed to compensate for alignment or angular changes caused by lift kits. Skyjackers transfer case lowering kit can be customized to fit Jeeps with aftermarket suspension upgrades. Reduce driveline vibration and prevent your transfer case shifter from sticking at those critical moments…

Transfer Case Lowering Kit,   1997-2002 Jeep Wrangler TJ

Tubular transfer case lowering kits allow enthusiasts to gain height without sacrificing the driveshaft. They help eliminate drivetrain angle problems and annoying driveline vibration

Slip Yoke Eliminator Kits
Sold Separately!

The Skyjacker® fixed yoke kit replaces the output shaft with a large 32 spline output and increases the drive shaft length by 4-1/2 inches.

Skyjacker Driveshafts
Sold Separately!

It’s necessary to install a longer driveshaft after the installation of a Slip Yoke Eliminator Kit. Skyjackers CV Driveshafts are much more rugged than the factory shaft and take the worry out of getting stuck out on a trail.

Tie Rod Heavy Duty DOM Swedged Tubular Replacement

These heavy duty replacment steering tubes are made from 1.250” D.O.M. swegded tubing. They fit the factory ends and allow for maximum articulation. No more bending; the strongest tubes available anywhere!

Tie Rod Heavy Duty DOM Swedged Tubular Replacement

SJ-TR300

Dropped Pitman Arm
Sold Separately!

A dropped pitman is designed to compensate for a vehicle's suspension lift to help maintain the factory feel at the steering wheel by eliminating "bump steer" and any potential interference with the steering components and the vehicle's chassis.

Transmission Oil Pan, High Capacity

Skyjackers High Capacity Oil Pan will prevent your automatic transmision from disengaging on steep angles and help keep your transmission cool.

Transmission Oil Pan, High Capacity

SJ-OPA999

Skid Plate, Steering Box

Protect your steering box with Skyjackers Rock Ready 3/16" thick steel skid plate. Increase ground clearance and provide a smooth surface for obstacles to slide over. Attaches with 4 bolts and adds an attractive addition to the undercarriage of your Jeep.

Skid Plate, Steering Box

SJ-SSP10

Skyjacker High Clearance Skid Plates
Sold Separately!

Skyjacker High Clearance Skid Plates protect your jeep suspension components by providing a smooth surface for trail obstacles to slide over. Skyjacker skid plates are made from corrosion resistant gold zinc plated material and are built to last.

Skid Plate Shoe, Manual Transmission
1997-2004 Jeep Wrangler TJ

Skid Plate Shoe, Manual Transmission

SJ-SPS28M

Skid Plate, High Clearance Transfer Case
1997-2002 Jeep Wrangler TJ 4WD

Skid Plate, High Clearance Transfer Case

SJ-SP28

Skid Plate High Clearance Transfer Case
2003-2006 Jeep Wrangler TJ 4WD

Skid Plate High Clearance Transfer Case

SJ-SP283

Bump Stop Spacers
Sold Separately!

Bump stops prevent too much axle travel, which can cause your tires to bump into your fender wells and axle tube to come into contact with your Jeep’s frame.

Bump Stop, Front or Rear 2.5 Inch

Bump stops prevent too much axle travel, which can cause your tires to bump into your fender wells and axle tube to come into contact with your Jeep’s frame.

Bump Stop, Front or Rear 2.5 Inch

SJ-BP50

Front Track Bar Assembly
Sold Separately!

The adjustable flex track bar kit uses a 3-piece, teflon lined, spherical rod end and is the best track bar configuration available for the TJ Wrangler, XJ Cherokee, and the ZJ Grand Cherokee. It allows for 24" of total travel, relocates the bar to the top of the axle and includes a heavy duty steering stabilizer. This track bar will work with most other manufacturers lift kits also.

Front Track Bar Assembly, Adjustable 2"- 5" Skyjacker

SJ-TBA10

Front Track Bar Assembly, Adjustable 6" Skyjacker

SJ-TBA60

Front Track Bar Assembly, Adjustable 8" Skyjacker

SJ-TBA80

Rear Track Bar Assembly
Sold Separately!

Skyjacker adjustable track bar relocates the track bar to the top of the axle and prevents sideways movement of the axle. Keep your differential tracking aligned during maximum articulation and extreme suspension travel.

Track Bar Relocation Bracket, Rear, 2"- 4" Skyjacker

These Skyjacker track bar brackets are designed to keep your suspension aligned throughout its travel range. They are available for lifted vehicles, or vehicles that need to relocate the OEM track bar.

Track Bar Relocation Bracket, Rear, 2"- 4" Skyjacker

SJ-TJRTB

Sway Bar, Rear Adjustable Skyjacker

Sway Bar, Rear Adjustable Skyjacker
1997-2006 Jeep Wrangler TJ SJ-RSBA410

Sway Bar, Rear Adjustable Skyjacker

SJ-RSBA410

Sway Bar Bushing Kits
Sold Separately!

Skyjackers Sway Bar Bushing kits are an ideal addition to your skyjacker suspension. Made from 100% rubber, which allows for maximum flex without breaking.

Rear Sway Bar Extended End Links, Skyjacker
Sold Separately!

Skyjackers Extended Sway Bar End links allow you to easily disconnect your sway bar when you need that extra articulation off road. Easy installation, simply replace your stock sway bar end links with skyjacker extended end links.