Chevy V8 & V6 to Jeep AX15 Bellhousing Adapter Kit Manual Transmission - GM Block With A 153T Flywheel.
- Product Details
This kit is designed to fit the GM block with a 153T flywheel.
This adapter bellhousing assembly is used to adapt the GM 4.3, V8 to the Jeep AX15, 5 speed manual transmissions. The bellhousing kit includes a 356 T-6 aluminum bellhousing, universal dust cover plate, pilot bushing, AX5 bearing retainer assembly, seal, throw-out arm, slave cylinder push rod, slave cylinder push rod end, ball pivot, fastening hardware, and adapter instructions.
Note: When using a 168th flywheel use bellhousing kit AA-712567V
Note: GM 4.3 V6 conversion applications with a 168th flywheel will experience header interference with the slave cylinder & throw-out arm. At that time, it is recommended that a muffler shop custom make an exhaust down pipe.
The AX15 was used in model years 1989-99. It has a overall transmission case length of 24.00". The output shaft has a positive stickout and is 23 spline. The AX15 was found coupled to the Jeep 4.0L. Through out the years we have seen two different input pilot tip dimensions. 1989-95 used a .590" diameter. 1997-99 used a .750" diameter.
Required Clutch Options
Alternate Part Numbers: 712567
*Some Items may require additional shipping surcharges such as Oversize Freight and Truck Freight items.
You might also like